Frigidaire Professional dishwashers are known for their reliability and performance. However, like any appliance, they can encounter issues from time to time. In this guide, we will discuss common problems you may encounter with your Frigidaire Professional dishwasher and provide troubleshooting steps to help you resolve them.
1. Dishwasher Doesn’t Start
Possible Causes:
- Power Supply: Ensure the dishwasher is plugged in and that the circuit breaker hasn’t tripped. Test the outlet with another device to verify power.
Troubleshooting Steps:
- Check the power source.
- Reset the circuit breaker if necessary.
- Ensure the door is fully closed and latched.
2. Dishes Don’t Get Cleaned Properly
Possible Causes:
- Clogged Spray Arms: Debris or food particles can clog the spray arms, reducing water flow.
- Improper Loading: Overloading or improper placement of dishes can obstruct water spray.
Troubleshooting Steps:
- Remove the lower and upper spray arms. Clean any debris or clogs and reassemble.
- Load dishes following the manufacturer’s guidelines.
- Use a high-quality dishwasher detergent and check the rinse aid dispenser.
3. Dishwasher Is Noisy
Possible Causes:
- Foreign Objects: Items like utensils or small objects may have fallen into the dishwasher’s pump or spray arm.
- Loose Parts: Loose screws, bolts, or dishwasher components can create noise during operation.
Troubleshooting Steps:
- Inspect the dishwasher’s interior for any foreign objects and remove them.
- Tighten any loose parts or components.
- If the noise persists, contact Frigidaire Professional’s customer support.
4. Dishwasher Leaks Water
Possible Causes:
- Door Seal: A damaged or worn-out door seal can cause leaks.
- Loose Connections: Check for loose hoses, clamps, or water inlet connections.
Troubleshooting Steps:
- Inspect the door seal for any visible damage and replace if necessary.
- Ensure all connections are tight and properly sealed.
- Check for cracks or damage in the dishwasher’s tub.
5. Dishwasher Doesn’t Drain
Possible Causes:
- Clogged Drain Hose: Debris or food particles can obstruct the drain hose.
- Faulty Drain Pump: A malfunctioning drain pump can prevent proper drainage.
Troubleshooting Steps:
- Remove the drain hose and check for clogs. Clear any obstructions.
- Inspect the drain pump for debris or damage.
- If the drain pump is faulty, consider replacing it.
6. Dishwasher Leaves Residue on Dishes
Possible Causes:
- Hard Water: Mineral deposits from hard water can leave spots and residue on dishes.
- Insufficient Detergent: Using too little detergent can result in poor cleaning.
Troubleshooting Steps:
- Use a dishwasher cleaner to remove mineral buildup. Consider installing a water softener if you have hard water.
- Ensure you are using the recommended amount of detergent.
- Check the rinse aid dispenser and adjust the settings if needed.
7. Error Codes on Display
Possible Causes:
- Electrical or Mechanical Issues: Various error codes may indicate electrical or mechanical problems.
Troubleshooting Steps:
- Refer to the dishwasher’s manual for a list of error codes and their meanings.
- If you can’t resolve the issue based on the code, contact Frigidaire Professional’s customer support or a qualified technician.
8. Dishwasher Doesn’t Dry Dishes Properly
Possible Causes:
- Rinse Aid Dispenser Empty: A lack of rinse aid can lead to water spots and poor drying.
- Heating Element Issues: A malfunctioning heating element can prevent proper drying.
Troubleshooting Steps:
- Check the rinse aid dispenser and refill it if empty. Adjust the rinse aid dispenser settings if necessary.
- Ensure the dishwasher’s heating element is functioning correctly. If it’s damaged or faulty, consider replacing it.
9. Unusual Odors in the Dishwasher
Possible Causes:
- Food Residue Buildup: Leftover food particles can accumulate and cause odors over time.
- Mold and Mildew: Moist conditions inside the dishwasher can promote mold and mildew growth.
Troubleshooting Steps:
- Regularly clean the dishwasher’s interior, including the door gasket and the tub, to remove any food residue.
- Run a cleaning cycle using a dishwasher cleaner or a mixture of vinegar and baking soda to eliminate odors and sanitize the dishwasher.
10. Dishwasher Stops Mid-Cycle
Possible Causes:
- Door Not Latched Properly: If the door isn’t closed or latched correctly, the dishwasher may stop mid-cycle.
- Water Supply Issues: Insufficient water supply can cause the dishwasher to stop.
Troubleshooting Steps:
- Ensure the dishwasher door is firmly closed and latched securely.
- Check the water supply to the dishwasher. Ensure the water inlet valve is fully open and the water pressure is adequate.
11. Inadequate Water Fill
Possible Causes:
- Water Supply Issues: Low water pressure or a partially closed water inlet valve can result in insufficient water.
Troubleshooting Steps:
- Check the water supply to the dishwasher. Ensure the water inlet valve is fully open.
- Inspect the water inlet valve for any clogs or debris. Clean or replace it if necessary.
12. Dishwasher Display Not Working
Possible Causes:
- Electrical Problems: Wiring issues or a faulty control board can cause the display to malfunction.
Troubleshooting Steps:
- Check the power supply to the dishwasher and ensure it’s getting electricity.
- Inspect the control board for any visible damage or loose connections. If found, consider repairing or replacing it.
13. Persistent Foaming
Possible Causes:
- Incorrect Detergent: Using regular dish soap instead of dishwasher detergent can cause excessive foaming.
Troubleshooting Steps:
- If regular dish soap was used, stop the dishwasher immediately, and manually remove the excess foam.
- Run a rinse cycle with no dishes to clear out any remaining soap residue.
14. Dishwasher Is Not Filling or Draining
Possible Causes:
- Faulty Water Inlet Valve: A malfunctioning water inlet valve can prevent water from entering the dishwasher.
- Clogged Drain Hose: A clogged drain hose can hinder proper drainage.
Troubleshooting Steps:
- Inspect the water inlet valve for any damage or blockages and replace if necessary.
- Check the drain hose for clogs or kinks and clear them.
- Ensure the dishwasher is properly leveled to allow for proper filling and draining.
Dishwasher Won’t Start
| Issue | Possible Cause | Solution | Additional Notes |
|---|---|---|---|
| No Power Indicator | Power outage or tripped breaker | Check power source and reset breaker | |
| Door Not Closed | Door not securely closed | Ensure the door is firmly closed | |
| Faulty Control Panel | Control panel malfunction | Contact Frigidaire for repairs | |
| Child Lock Enabled | Child lock feature activated | Disable child lock feature | Refer to user manual |
| Wiring Issues | Wiring problems | Inspect and repair damaged wiring | Professional help may be needed |
Dishwasher Not Cleaning Dishes Properly
| Issue | Possible Cause | Solution | Additional Notes |
|---|---|---|---|
| Clogged Spray Arms | Spray arms blocked with debris | Clean spray arms and remove debris | Refer to user manual |
| Water Temperature | Water not hot enough | Increase water heater temperature | Check water heater settings |
| Dirty Filters | Filters clogged with debris | Clean or replace filters as needed | Refer to user manual |
| Incorrect Detergent | Wrong detergent or too little | Use recommended detergent and quantity | Check detergent dispenser |
| Overloaded | Dishwasher overloaded | Load dishes properly, don’t overload |
Dishwasher Leaking
| Issue | Possible Cause | Solution | Additional Notes |
|---|---|---|---|
| Door Seal Damaged | Damaged door gasket | Replace the door gasket | Check for visible damage |
| Loose Hose | Loose or damaged hose | Tighten or replace hose | Inspect for visible damage |
| Excessive Detergent | Too much detergent used | Use the correct amount of detergent | Check detergent dispenser |
| Dishwasher Overfilled | Overfilled with water | Adjust water level and ensure proper draining | Refer to user manual |
| Faulty Pump | Pump malfunction | Contact Frigidaire for repairs |
Dishwasher Noisy Operation
| Issue | Possible Cause | Solution | Additional Notes |
|---|---|---|---|
| Loose Items Inside | Loose items in dishwasher | Remove loose items before running | |
| Clogged Spray Arms | Debris in spray arms | Clean spray arms and remove debris | Refer to user manual |
| Faulty Motor | Motor issues | Contact Frigidaire for repairs | |
| Loose Mounting Brackets | Mounting brackets not secure | Tighten mounting brackets | Refer to user manual |
| Water Hammer | Water hammer noise | Install water hammer arrestor |
Dishwasher Not Draining
| Issue | Possible Cause | Solution | Additional Notes |
|---|---|---|---|
| Clogged Drain Hose | Drain hose blocked | Clear blockage in the drain hose | Check for kinks or bends |
| Blocked Filter | Clogged filter | Clean or replace filters as needed | Refer to user manual |
| Faulty Pump | Pump malfunction | Contact Frigidaire for repairs | |
| Garbage Disposal Clog | Clogged garbage disposal | Clear the disposal and run again | |
| Drain Solenoid Issue | Solenoid malfunction | Contact Frigidaire for repairs |
Remember to always turn off the power supply and water source to the dishwasher before attempting any repairs or maintenance. If you’re uncertain about any troubleshooting steps or if the problem persists, it’s best to contact a qualified technician or Frigidaire Professional’s customer support for assistance. Regular maintenance and following the manufacturer’s guidelines for dishwasher use can help prevent many of these issues from occurring in the first place.
