Maytag Centennial Washer Troubleshooting

If you own a Maytag Centennial washer and are encountering issues with its performance, it can be frustrating. However, many common problems can be resolved with some troubleshooting steps before resorting to professional repair. This guide will walk you through some common issues and their solutions.

Washer Doesn’t Start

1. Check Power Supply:

  • Ensure the washer is plugged into a working electrical outlet.
  • Check your home’s circuit breaker to make sure the circuit hasn’t tripped.

2. Lid Switch:

  • The washer won’t start if the lid switch is faulty. Verify that the lid is closing properly and that the switch isn’t damaged.

3. Control Lock:

  • Some Maytag Centennial models have a control lock feature. Check if the control lock is engaged and deactivate it according to the user manual instructions.

Washer Doesn’t Fill with Water

1. Water Supply:

  • Ensure that the water supply valves are fully open and that water is flowing into the washer.

2. Water Inlet Valve:

  • Check if the water inlet valve screens are clogged. Clean or replace them if necessary.
  • Inspect the water inlet valve itself for any damage or malfunction and replace it if needed.

Washer Doesn’t Drain or Spin

1. Drain Hose:

  • Check the drain hose for clogs or kinks. A blocked hose can prevent proper draining.

2. Drain Pump:

  • Inspect the drain pump for debris or foreign objects. Clean it out if necessary.
  • If the pump is making unusual noises or not functioning, it may need replacement.

3. Lid Switch:

  • If the washer’s lid switch is faulty, it may not drain or spin. Test the switch and replace it if needed.

Washer is Noisy During Operation

1. Leveling:

  • Ensure the washer is properly leveled. An unbalanced washer can make excessive noise during operation.

2. Load Balance:

  • Overloading or underloading the washer can cause it to become noisy. Make sure you are loading it correctly.

3. Drum Bearings:

  • If you hear a loud, persistent noise, it might indicate an issue with the drum bearings. Replacing them can resolve the problem.

Washer Doesn’t Agitate

1. Agitator Dogs:

  • The agitator dogs inside the agitator assembly can wear out over time. Replace them if they’re damaged.

2. Drive Belt:

  • If the drive belt is broken or loose, the washer won’t agitate. Inspect and replace the belt if necessary.

3. Motor Coupling:

  • Check the motor coupling for wear or damage. A faulty coupling can prevent the washer from agitating properly.

Washer Leaks Water

1. Drain Hose:

  • Ensure the drain hose is properly connected and not damaged.

2. Tub Seal:

  • If you notice water leaking from the bottom of the washer, it could be due to a damaged tub seal. Replacement is required in this case.

Error Codes

1. Error Codes Displayed:

  • Refer to your washer’s manual for a list of error codes and their meanings. Error codes can provide valuable information about specific issues.

 

Washer Doesn’t Dispense Detergent

1. Clogged Dispenser:

  • Inspect the detergent dispenser for clogs or detergent buildup. Clean it thoroughly to ensure proper detergent flow.

2. Detergent Type:

  • Confirm you’re using the correct type of detergent and not overloading the dispenser. Using high-efficiency (HE) detergent is often recommended for front-loading machines.

Washer Shakes or Vibrates Excessively

1. Leveling:

  • Recheck the washer’s leveling. Proper leveling is essential to prevent excessive vibrations. Use a bubble level to ensure it’s balanced.

2. Floor Surface:

  • The washer may vibrate excessively if it’s placed on an uneven or weak floor. Make sure the floor can support the washer’s weight and is even.

3. Shipping Bolts:

  • If the washer was recently installed or moved, make sure the shipping bolts that secure the drum during transport have been removed. Failing to do so can lead to excessive vibrations.

Washer Stops Mid-Cycle

1. Power Interruption:

  • Check if there was a power interruption during the cycle. Some models may pause during power fluctuations and need to be restarted manually.

2. Overheating:

  • If the washer overheats due to a heavy load or an issue with the motor, it may stop mid-cycle to prevent damage. Let it cool down and redistribute the load before restarting.

3. Control Board:

  • A malfunctioning control board can cause the washer to stop unexpectedly. If you’ve ruled out other issues, consider having the control board inspected and replaced if necessary.

Washer Smells Bad

1. Cleaning:

  • Over time, residue from detergents, dirt, and lint can build up in the washer and cause unpleasant odors. Run a cleaning cycle with vinegar or a commercial washer cleaner to eliminate odors.

2. Ventilation:

  • Ensure the washer is in a well-ventilated area. Proper ventilation can help prevent the growth of mold and mildew, which can cause bad smells.

3. Door Seal:

  • Inspect the door seal for mold or mildew growth. Clean it regularly and leave the door ajar after use to allow air circulation.

Maintenance Tips

To keep your Maytag Centennial washer running smoothly, consider these maintenance tips:

1. Clean the Lint Filter: Remove lint from the filter after every wash to maintain optimal performance.

2. Regularly Clean the Drum: Wipe down the drum, door seal, and detergent dispenser to prevent mold and odors.

3. Check Hoses: Periodically inspect the water inlet and drain hoses for leaks or damage.

4. Balance Loads: Avoid overloading or underloading the washer to prevent unnecessary wear and tear.

5. Professional Maintenance: Schedule periodic professional maintenance to keep your washer in top condition and catch potential issues early.

 

Washer Won’t Start

Issue Possible Cause Solution Parts Needed Additional Notes
Washer won’t power on Power cord unplugged or damaged Check power cord and replace if needed N/A Ensure the outlet is working correctly.
Control panel issue Control lock is enabled Deactivate control lock function N/A Refer to the user manual for guidance.
Faulty door switch Door not properly closed Inspect and replace the door switch Door switch replacement part Make sure the door latches securely.
Overloaded washer Overload sensor triggered Remove some clothes and redistribute N/A Follow load capacity guidelines.
Electrical problem Circuit breaker tripped Reset the breaker and try again N/A Consult an electrician if it recurs.

Washer Leaking Water

Issue Possible Cause Solution Parts Needed Additional Notes
Damaged hoses Hose connections loose or damaged Tighten or replace hoses Replacement hoses Check hoses for cracks or leaks.
Clogged drain Drain pipe or filter clogged Clear the blockage N/A Regularly clean the drain filter.
Faulty water inlet valve Valve not closing properly Replace the water inlet valve Water inlet valve part Ensure water pressure is correct.
Overloaded washer Overloading can cause leaks Reduce the load size N/A Follow load capacity recommendations.
Damaged tub seal Seal around the tub damaged Replace the tub seal Tub seal replacement part Inspect for signs of wear and tear.

Washer Not Draining

Issue Possible Cause Solution Parts Needed Additional Notes
Clogged drain Drain pipe or filter clogged Clear the blockage N/A Regularly clean the drain filter.
Kinked drain hose Hose bent or kinked Straighten or replace the hose Replacement drain hose Ensure the hose is properly installed.
Faulty drain pump Pump not functioning correctly Replace the drain pump Drain pump replacement part Listen for unusual pump sounds.
Clogged drain pump Debris obstructing pump Clean out debris from the pump N/A Regular maintenance can prevent this.
Faulty lid switch Lid switch not engaging Check and replace the lid switch Lid switch replacement part Ensure the lid closes securely.

Washer Not Spinning

Issue Possible Cause Solution Parts Needed Additional Notes
Unbalanced load Load not evenly distributed Rebalance the load N/A Use the “Bulky Items” cycle for bedding.
Faulty drive belt Drive belt broken or loose Replace the drive belt Drive belt replacement part Listen for squealing or unusual noises.
Motor issue Motor not functioning correctly Inspect and replace the motor Motor replacement part Motor problems may require a technician.
Transmission problem Transmission malfunction Repair or replace the transmission Transmission part Unusual noises during spin may indicate.
Faulty control board Control board malfunction Replace the control board Control board replacement part Consult a technician for board issues.

Washer Vibrating Excessively

Issue Possible Cause Solution Parts Needed Additional Notes
Unbalanced load Load not evenly distributed Rebalance the load N/A Use the “Bulky Items” cycle for bedding.
Uneven floor surface Washer not level Adjust the washer’s leveling feet N/A Use a level to ensure proper leveling.
Damaged suspension Suspension rods damaged or worn Replace suspension rods Suspension rod kit Check for visible signs of damage.
Drum bearings worn Drum bearings showing wear Replace the drum bearings Drum bearing replacement part Listen for loud, rumbling noises.
Overloaded washer Overloading can cause excessive vibration Reduce the load size N/A Follow load capacity recommendations.

When to Seek Professional Help

If you’ve followed these troubleshooting steps and your Maytag Centennial washer still isn’t working correctly, or if you’re uncomfortable performing these tasks, it’s advisable to contact a professional appliance repair service. They can diagnose and fix more complex issues and ensure your washer operates efficiently.

Remember to always prioritize safety when troubleshooting and repairing appliances. Disconnect the power source and follow safety guidelines outlined in the user manual.

 

Maytag Centennial Washer Troubleshooting

Leave a Comment