Reset Maytag Bravos Washer

If your Maytag Bravos washer is experiencing issues or errors, a reset can often help resolve minor problems. Resetting the washer essentially clears its memory and allows it to start fresh. Here’s a step-by-step guide on how to reset a Maytag Bravos washer.

Safety Precautions

Before attempting any troubleshooting or reset procedures, ensure your safety and the safety of your appliance:

  1. Unplug the Washer: Always disconnect the washer from the power source before attempting any reset or maintenance procedures to prevent electrical accidents.
  2. Turn Off the Water Supply: For your safety and to prevent potential water leaks, shut off the water supply to the washer.

Method 1: Resetting the Washer Control

This method involves a simple control panel reset and is the first step in resolving common issues with your Maytag Bravos washer.

  1. Power Off the Washer: Make sure the washer is not running. If it is, wait for any ongoing cycles to complete.
  2. Unplug the Washer: Disconnect the washer from the electrical outlet.
  3. Wait for a Few Minutes: Allow the washer to sit unplugged for about 5 minutes. This time is necessary to ensure the control panel fully discharges any residual power.
  4. Plug the Washer Back In: After the waiting period, plug the washer back into the electrical outlet.
  5. Turn the Washer On: Press the Power button to turn the washer on. It should now be reset and ready to use.
  6. Test the Washer: Run a small test cycle to ensure the reset was successful. This will help confirm if the issue has been resolved.

Method 2: Factory Reset

If the control panel reset doesn’t resolve the issue, you can perform a factory reset, which will return your Maytag Bravos washer to its default settings. Please note that this will erase any custom settings you’ve configured.

  1. Unplug the Washer: As a safety precaution, unplug the washer from the electrical outlet.
  2. Wait for 1 Minute: Allow the washer to sit unplugged for at least one minute.
  3. Press and Hold the Start Button: While keeping the Start button pressed, plug the washer back into the electrical outlet. Continue holding the Start button for about 10 seconds.
  4. Release the Start Button: After 10 seconds, release the Start button. The washer should now display the default settings and should be reset.
  5. Test the Washer: Run a test cycle to ensure that the factory reset has resolved the issue. Reconfigure any custom settings as needed.

1. Reset for Error Codes

If your Maytag Bravos washer displays an error code on the control panel, it indicates a specific issue. You can try to reset the washer to clear the error code and potentially resolve the problem:

  1. Note the Error Code: Before attempting a reset, take note of the error code displayed on the control panel. This code can help diagnose the issue more accurately.
  2. Power Off and Unplug: Turn off the washer and unplug it from the electrical outlet.
  3. Wait for a Few Minutes: Wait for about 5 minutes to ensure the control panel discharges any residual power.
  4. Plug It Back In: Reconnect the washer to the power source.
  5. Power On: Turn the washer back on and see if the error code has cleared. If it has, try running a test cycle to confirm that the issue has been resolved.

2. Reset for Stuck or Unresponsive Controls

If the control panel buttons of your Maytag Bravos washer become unresponsive or seem stuck, you can reset the control panel to address this issue:

  1. Unplug the Washer: Disconnect the washer from the electrical outlet.
  2. Wait for 1 Minute: Allow the washer to sit unplugged for at least one minute.
  3. Press and Hold Cancel/Stop Button: While keeping the Cancel/Stop button pressed, plug the washer back into the electrical outlet. Continue holding the Cancel/Stop button for about 10 seconds.
  4. Release the Cancel/Stop Button: After 10 seconds, release the Cancel/Stop button. The control panel should now reset.
  5. Test the Controls: Check if the control panel buttons are responsive. If they are, your issue may be resolved.

3. Reset for Draining or Spinning Issues

If your Maytag Bravos washer is having problems with draining or spinning, you can perform a reset to potentially address these issues:

  1. Unplug the Washer: Disconnect the washer from the electrical outlet.
  2. Wait for 1 Minute: Allow the washer to sit unplugged for at least one minute.
  3. Plug the Washer Back In: Reconnect the washer to the power source.
  4. Select Drain and Spin Cycle: Set the washer to a “Drain and Spin” cycle and start it. This will attempt to clear any remaining water and address spinning problems.
  5. Monitor the Cycle: Keep an eye on the cycle to ensure that the washer drains and spins properly.

4. Reset for Load Imbalance Issues

If your Maytag Bravos washer consistently stops due to load imbalance, you can reset it to potentially resolve this problem:

  1. Unplug the Washer: Disconnect the washer from the electrical outlet.
  2. Wait for 1 Minute: Allow the washer to sit unplugged for at least one minute.
  3. Plug It Back In: Reconnect the washer to the power source.
  4. Rearrange the Load: Check the load inside the washer for proper distribution. Rearrange any items that might be causing imbalance.
  5. Restart the Cycle: Select the desired cycle and restart the washer. Ensure that it completes the cycle without interruption.

When to Seek Professional Help

If you’ve tried all the above troubleshooting steps and your Maytag Bravos washer still doesn’t function correctly, it’s time to contact a professional appliance technician. They have the necessary skills and tools to diagnose and repair more complex issues with your washer, ensuring it operates smoothly and efficiently.

 

Reset Methods

Reset Method Description Steps to Follow Time Required Frequency
Power Cycle Basic reset by turning off and on 1. Turn off washer. 2. Wait 30 seconds. 3. Turn on washer. <5 minutes As needed
Factory Reset Resets to factory settings 1. Turn off washer. 2. Unplug for 1 hour. 3. Plug in and turn on. 1 hour+ Occasional
Control Lock Reset Unlocks control panel 1. Press and hold “Control Lock” for 3 seconds. 2. Wait for beep. <1 minute As needed
Error Code Reset Clears error codes for troubleshooting 1. Turn off washer. 2. Unplug for 1 minute. 3. Plug in and turn on. 1-2 minutes As needed
Calibration Reset Restores default sensor calibration 1. Turn off washer. 2. Press and hold “Start” for 3 seconds. 3. Release and start cycle. <1 minute As needed

Common Issues

Issue Symptom Possible Causes Reset Method Additional Steps
Washer won’t start Control panel unresponsive Power surge, control lock, or error Power Cycle Check power outlet and circuit.
Error codes Display shows error codes Sensor or system malfunction Error Code Reset Refer to manual for code meanings.
Control lock Buttons don’t respond Control lock enabled Control Lock Reset Check for Child Lock function.
Sensor issues Inaccurate water level or cycles Sensor calibration or malfunction Calibration Reset Check for sensor blockages.
Stuck in cycle Washer won’t finish a cycle Power interruption or control issue Power Cycle Manually drain if necessary.

Error Codes

Error Code Description Possible Causes Recommended Action Reset Method
F0E2 Excessive Suds Excessive detergent or overloading Rinse and spin without detergent. Error Code Reset
F7E1 Basket Speed Sensor Fault Speed sensor malfunction Check for obstructions, reset sensor. Error Code Reset
F5E1 Lid Switch Fault Lid switch malfunction Inspect and replace if necessary. Error Code Reset
F8E1 No Water Detected Water supply issue Check water supply and hoses. Error Code Reset
F9E1 Long Drain Drain pump or hose issue Check for blockages and kinks. Error Code Reset

Troubleshooting Tips

Issue Troubleshooting Steps
Washer won’t start 1. Ensure power and water supply. 2. Check for error codes.
Excessive noise 1. Level the washer. 2. Check for loose items inside.
Leaking water 1. Check hoses and connections. 2. Inspect the drain pump.
Spin cycle issues 1. Balance the load. 2. Check for obstructions in the drum.
Odor or mold buildup 1. Run a cleaning cycle with vinegar and hot water.

Maintenance

Maintenance Task Frequency Description
Clean lint filter After every load Prevents lint buildup in the drain system.
Clean detergent dispenser Monthly Removes detergent residue and mold.
Inspect hoses Annually Check for cracks, leaks, or blockages.
Clean drum and gasket Quarterly Remove debris and mold to prevent odors.
Check water inlet filters Bi-annually Ensures proper water flow into the washer.

In summary, the Maytag Bravos washer offers various reset procedures tailored to different issues. Remember to prioritize safety, document error codes, and seek professional help if the problem persists.

 

 

 

Reset Maytag Bravos Washer

Leave a Comment