Whirlpool Dryer Won’t Start But Has Power

A Whirlpool dryer that won’t start but has power can be a frustrating issue to deal with. You’ve checked the power source, and it’s working fine, yet the dryer remains unresponsive. In this guide, we’ll walk you through a step-by-step troubleshooting process to help you identify and potentially fix the problem.

1. Power Supply Check:

Before diving into more complex issues, ensure that your Whirlpool dryer is receiving power correctly:

  • Verify that the power cord is properly plugged into the outlet.
  • Check the circuit breaker or fuse box to confirm that the circuit is not tripped or blown.
  • Test the outlet with another appliance to ensure it’s delivering power.

2. Door Switch:

A malfunctioning door switch can prevent the dryer from starting, even when it has power. Here’s how to check and potentially fix it:

  • Open and close the dryer door firmly. Sometimes, the switch may not engage properly.
  • Inspect the door switch for physical damage or loose wires.
  • Use a multimeter to check for continuity in the door switch. If it doesn’t have continuity when the door is closed, it may need replacement.

3. Thermal Fuse:

The thermal fuse is a safety device that can shut off power to the dryer if it overheats. If it’s blown, your dryer won’t start. Here’s how to check and replace it if necessary:

  • Locate the thermal fuse, usually located on the blower housing or exhaust duct.
  • Disconnect the dryer from the power source.
  • Use a multimeter to check for continuity in the thermal fuse. If it doesn’t have continuity, replace it.

4. Start Switch:

The start switch on your dryer may be faulty. To test and replace it if necessary:

  • Access the control panel and remove the start switch.
  • Use a multimeter to check for continuity in the switch when it’s in the “on” position. If there’s no continuity, the switch needs replacing.

5. Drive Motor:

The drive motor is responsible for turning the drum in your dryer. If it’s malfunctioning, the dryer won’t start. To check it:

  • Disconnect the dryer from the power source.
  • Access the drive motor and inspect it for physical damage.
  • Test the motor’s windings for continuity using a multimeter. If there’s no continuity, the motor may need replacement.

6. Control Board:

If all else seems fine, the issue might lie with the dryer’s control board. However, diagnosing and replacing a control board is more complex and might require professional assistance.

7. Professional Assistance:

If you’ve tried all the above steps and your Whirlpool dryer still won’t start, it’s time to call a professional technician. They can diagnose the problem more accurately and safely perform any necessary repairs or replacements.

8. Belt and Drum Issues:

If the dryer’s belt is broken or the drum is jammed, it can prevent the dryer from starting. To check for these issues:

  • Disconnect the dryer from the power source.
  • Open the dryer’s top or front panel, depending on the model, to access the drum and belt.
  • Inspect the belt for any signs of damage or breakage. If it’s damaged, replace it.
  • Manually rotate the drum to ensure it moves freely. If it’s stuck, investigate the cause, which could be a foreign object or misalignment.

9. Overheating Prevention:

Whirlpool dryers often come equipped with a thermal cut-off fuse or high-limit thermostat to prevent overheating. If these components fail, they can also prevent the dryer from starting. To check and replace them:

  • Disconnect the dryer from the power source.
  • Locate the thermal cut-off fuse and high-limit thermostat, typically found on the heating element housing.
  • Use a multimeter to check for continuity in both components. If they don’t have continuity, replace them.

10. Ventilation System:

Improper ventilation can cause a Whirlpool dryer to overheat and shut down. Check the dryer’s exhaust vent and lint filter for blockages. A clogged vent can restrict airflow and lead to overheating issues. Clean or replace the vent and lint filter if necessary.

11. Error Codes:

Many modern Whirlpool dryers are equipped with error code displays. If your dryer has one, it can provide valuable information about the problem. Consult your dryer’s manual to decipher the error code and take appropriate action.

12. Wiring and Electrical Connections:

Inspect the wiring and electrical connections within the dryer. Loose or damaged wires can disrupt power flow and prevent the dryer from starting. Ensure all wires and connectors are securely in place and not damaged.

13. Test with a Different Outlet:

Sometimes, the issue might not be with the dryer but with the power outlet itself. Test the dryer with a different outlet to rule out any potential problems with the original outlet.

14. User Manual and Online Resources:

Consult your dryer’s user manual for specific troubleshooting instructions and diagrams. Additionally, Whirlpool often provides online resources, including troubleshooting guides and FAQs, that can help you pinpoint and fix common issues.

 

Common Power-Related Issues

Issue Possible Cause Solution Test Result
Dryer not plugged in Loose power cord Ensure the dryer is properly plugged in Plug in the dryer If it starts, problem solved
Circuit breaker tripped Overloaded circuit Reset the circuit breaker Turn on dryer If it starts, problem solved
Faulty power outlet Damaged outlet or wiring Check and repair the outlet or wiring Plug in another device If it works, outlet issue
Extension cord used Inadequate extension cord Use a heavy-duty extension cord Replace the extension cord If it starts, cord issue
Power surge Recent electrical disturbances Reset the dryer’s electronics Power cycle the dryer If it starts, issue resolved

Door-Related Issues

Issue Possible Cause Solution Test Result
Door not closed Door latch or sensor problem Ensure the door is fully closed and secure Press firmly on the door If it starts, door issue
Door switch faulty Faulty door switch Replace the door switch Push the switch manually If it starts, switch issue
Debris in door seal Obstruction preventing closure Clean the door seal and surrounding area Inspect the door seal for debris If it starts, debris removed
Damaged door hinge Hinge issues Repair or replace damaged hinge Manually check door movement If it starts, hinge issue
Door misalignment Door frame alignment issue Adjust the door frame if necessary Check for door alignment issues If it starts, alignment issue

Thermal Fuse and Temperature Issues

Issue Possible Cause Solution Test Result
Thermal fuse blown Overheating or other issues Replace the thermal fuse Use a multimeter to check continuity If it’s blown, replace it
High-limit thermostat Overheating due to a malfunction Replace the high-limit thermostat Test with a multimeter If it’s faulty, replace it
Cycling thermostat issues Inaccurate temperature control Replace the cycling thermostat Test with a multimeter If it’s faulty, replace it
Heating element failure No heat generated Replace the heating element Check for continuity with a multimeter If it’s faulty, replace it
Airflow obstruction Poor ventilation Clean lint buildup and ensure proper airflow Inspect the dryer vent and ducting system Clear obstruction if found

 Control Panel and Start Button Issues

Issue Possible Cause Solution Test Result
Control panel failure Control board malfunction Replace the control board Check for error codes, if available If it starts, control board issue
Start button issue Faulty start button or circuit Replace or repair the start button or circuit Press the start button If it starts, button or circuit issue
Control lock enabled Control lock feature engaged Disable the control lock feature Refer to the user manual If it starts, control lock issue
Wire connections Loose or disconnected wires Reconnect or repair loose wires Visually inspect internal connections If it starts, wiring issue
Control board reset Software glitch or error Perform a control board reset Follow manufacturer’s instructions If it starts, issue resolved

Motor and Drive Belt Issues

Issue Possible Cause Solution Test Result
Motor malfunction Motor failure or overheating Replace the motor Listen for unusual noises If it starts, motor issue
Broken drive belt Drive belt wear or damage Replace the drive belt Inspect the belt for wear or damage If it starts, belt issue
Motor switch issue Faulty motor switch Replace the motor switch Test the switch for continuity If it’s faulty, replace it
Drum obstruction Foreign objects in the drum Remove any foreign objects Manually turn the drum If it starts, obstruction removed
Motor capacitor issue Capacitor failure Replace the motor capacitor Test the capacitor with a multimeter If it’s faulty, replace it

 

Conclusion:

Troubleshooting a Whirlpool dryer that won’t start but has power requires a methodical approach, checking various components from the power supply to internal mechanisms. By systematically examining each potential problem area, you can identify the cause of the issue and, in many cases, resolve it yourself. However, if you’re uncomfortable with any of the procedures or if the problem persists, it’s best to seek professional assistance to ensure a safe and effective repair.

 

Whirlpool Dryer Won’t Start But Has Power

Leave a Comment