Whirlpool Microwave Over The Range Troubleshooting

Microwaves are essential kitchen appliances, and when they’re installed over the range, they provide even more convenience. However, like any other appliance, Whirlpool microwave over the range models can encounter issues from time to time. This troubleshooting guide will help you identify and address common problems you might face with your Whirlpool microwave.

1. Microwave Not Powering On

Issue: Your Whirlpool microwave isn’t turning on, and there’s no sign of power.

Troubleshooting Steps:

  1. Check the Power Source: Ensure that the microwave is plugged in properly, and the outlet is functioning. Test the outlet by plugging in another device.
  2. Circuit Breaker: Check your home’s circuit breaker or fuse box to see if the microwave’s circuit has tripped or blown a fuse. Reset or replace the fuse as necessary.
  3. Control Panel: Inspect the microwave’s control panel for any visible damage or loose connections. If you find any issues, contact Whirlpool customer service or a technician for repairs.

2. Microwave Not Heating

Issue: The microwave turns on, but it’s not heating the food.

Troubleshooting Steps:

  1. Check the Door: Ensure the microwave door is fully closed and latches securely. The microwave won’t operate if the door is open or not closed properly.
  2. Check Power Settings: Make sure you’re using the correct power settings and time for heating. Some items may require a higher power level or longer cooking time.
  3. Turntable: Ensure the turntable is properly seated on the support ring. It must rotate freely for even heating. Clean and reposition if necessary.
  4. Magnetron: The magnetron is responsible for generating microwaves. If it’s faulty, the microwave won’t heat. Contact Whirlpool customer service or a technician for magnetron replacement.

3. Microwave Displays Error Code

Issue: Your Whirlpool microwave displays an error code.

Troubleshooting Steps:

  1. Refer to the Manual: Check your microwave’s user manual for a list of error codes and their meanings. The manual often provides troubleshooting steps specific to each code.
  2. Power Cycle: Try turning off the microwave by unplugging it or using the circuit breaker. Wait a few minutes and then plug it back in or reset the circuit breaker to see if the error clears.
  3. Factory Reset: Some microwaves allow you to perform a factory reset to clear error codes. Refer to the manual for instructions on how to do this.
  4. Service Call: If the error persists, especially if it indicates a serious issue like a sensor malfunction, it’s best to contact Whirlpool customer service or a technician for assistance.

4. Microwave Making Unusual Noises

Issue: Your microwave is emitting strange or loud noises during operation.

Troubleshooting Steps:

  1. Check for Foreign Objects: Ensure there are no foreign objects, like utensils or food debris, inside the microwave. These can cause unusual noises and potentially damage the appliance.
  2. Turntable and Roller Ring: Check the turntable and roller ring for damage or misalignment. These components may produce noise if not functioning correctly.
  3. Exterior Inspection: Carefully inspect the exterior of the microwave for loose parts or visible damage. Tighten any loose screws or components.
  4. Exhaust Fan: The exhaust fan can also create noise. Ensure it’s clean and functioning properly.
  5. Service Call: If the noise persists or is severe, it’s advisable to contact Whirlpool’s customer service or a technician for a thorough inspection.

5. Microwave Buttons Not Responding

Issue: The buttons on the microwave control panel are not responding when pressed.

Troubleshooting Steps:

  1. Child Lock: Check if the microwave has a child lock feature enabled. If so, refer to the manual to learn how to disable it.
  2. Control Panel Reset: Sometimes, the control panel may become unresponsive due to temporary glitches. Try unplugging the microwave for a few minutes, then plug it back in to reset the control panel.
  3. Clean the Control Panel: Ensure that the control panel is clean and free from any food residue or spills that might be interfering with the buttons’ functionality.
  4. Check for Physical Damage: Inspect the control panel for any physical damage or wear. If you notice any issues, contact Whirlpool customer service or a technician for repairs.

6. Microwave Sparks or Arcing

Issue: Sparks or arcing occur inside the microwave during operation.

Troubleshooting Steps:

  1. Metal Objects: Ensure that no metal objects, such as aluminum foil or metal-trimmed dishes, are placed inside the microwave. Metal can cause sparks and damage the appliance.
  2. Burnt Residue: If there is burnt residue inside the microwave, carefully clean it using a microwave-safe cleaner. Make sure to remove any charred food particles.
  3. Microwave-Safe Dishes: Only use microwave-safe dishes and containers. Check for any cracks or damage on microwave-safe cookware, as compromised items can lead to arcing.
  4. Inspect the Waveguide Cover: The waveguide cover is a component that helps distribute microwaves evenly. If it’s damaged or has chipped paint, it can cause arcing. Replace it if necessary.
  5. Service Call: If sparks or arcing continue despite following these steps, discontinue use immediately and contact Whirlpool customer service or a technician for further inspection and repairs.

7. Microwave Light Not Working

Issue: The interior light of the microwave is not illuminating when the door is opened.

Troubleshooting Steps:

  1. Replace the Bulb: Like any light bulb, the one inside the microwave can burn out over time. Check your microwave’s manual for instructions on how to replace the interior light bulb.
  2. Door Switches: The light is typically controlled by door switches. Check these switches to ensure they are functioning correctly. If a switch is faulty, it may need to be replaced.
  3. Control Board: If both the bulb and door switches are in working order, but the light still doesn’t turn on, there may be an issue with the microwave’s control board. Contact Whirlpool customer service or a technician for further assistance.

8. Microwave Exhaust Fan Not Working

Issue: The exhaust fan on the microwave is not operating as expected.

Troubleshooting Steps:

  1. Settings: Ensure that the exhaust fan is set to the desired speed and that it’s not in “off” mode.
  2. Clean the Filters: Over time, grease and debris can accumulate in the exhaust fan filters. Remove and clean these filters according to the microwave’s manual.
  3. Check the Fan Blades: Inspect the fan blades for any obstructions or damage that might impede their rotation. Clean or replace as necessary.
  4. Wiring and Motor: If the exhaust fan still doesn’t work after these steps, there may be an issue with the fan motor or the electrical connections. Contact Whirlpool customer service or a technician for further diagnosis and repair.

Microwave Won’t Turn On

Problem Possible Cause Solution Parts Needed Additional Notes
Microwave won’t power on 1. Power cord unplugged or damaged 1. Plug in or replace the power cord Check wall outlet too.
2. Circuit breaker tripped 2. Reset the circuit breaker
3. Faulty door switch 3. Replace the door switch Door switch Safety feature malfunction.
4. Control board failure 4. Replace the control board Control board Requires professional repair.

Microwave Not Heating

Problem Possible Cause Solution Parts Needed Additional Notes
Microwave not heating 1. Magnetron failure 1. Replace the magnetron Magnetron Requires professional repair.
2. High voltage diode or capacitor 2. Replace the diode or capacitor Diode/Capacitor Safety warning: High voltage.
3. Faulty door switch 3. Replace the door switch Door switch Safety feature malfunction.
4. Control board failure 4. Replace the control board Control board Requires professional repair.

Microwave Turntable Not Turning

Problem Possible Cause Solution Parts Needed Additional Notes
Turntable not rotating 1. Turntable motor failure 1. Replace the turntable motor Turntable motor Requires professional repair.
2. Turntable support or coupler worn 2. Replace support or coupler parts Support/Coupler Check for visible damage.
3. Control board issue 3. Replace the control board Control board Requires professional repair.

Microwave Produces Sparks

Problem Possible Cause Solution Parts Needed Additional Notes
Sparks inside microwave 1. Metal objects or foil in microwave 1. Remove all metal objects Never use metal in microwave.
2. Damaged waveguide cover 2. Replace the waveguide cover Waveguide cover Protects interior components.
3. Faulty magnetron or diode 3. Replace the magnetron or diode Magnetron/Diode Requires professional repair.

Microwave Display Error Codes

Error Code Meaning Solution Parts Needed Additional Notes
F1 Internal control board failure 1. Power cycle the microwave If error persists, call for service.
F2 Shorted thermal sensor 2. Replace the thermal sensor Thermal sensor Safety feature malfunction.
F3 Sensor open or shorted 3. Check and replace sensor wiring Sensor wiring Requires professional repair.
F4 Open humidity sensor 4. Replace the humidity sensor Humidity sensor Affects cooking accuracy.

 

Remember that safety is paramount when dealing with microwave troubleshooting. Always unplug the microwave or turn off the circuit breaker before attempting any repairs or maintenance. If in doubt, or if the issue persists after troubleshooting, it’s best to seek professional assistance from Whirlpool’s customer service or a certified technician to avoid safety hazards and further damage to the appliance.

 

 

Whirlpool Microwave Over The Range Troubleshooting

Leave a Comment